• Rubber Track 300*52.5*74n for Mini Excavator
  • Rubber Track 300*52.5*74n for Mini Excavator
  • Rubber Track 300*52.5*74n for Mini Excavator
  • Rubber Track 300*52.5*74n for Mini Excavator
  • Rubber Track 300*52.5*74n for Mini Excavator
  • Rubber Track 300*52.5*74n for Mini Excavator

Rubber Track 300*52.5*74n for Mini Excavator

Type: Crawler
Application: Loader
Certification: ISO9001: 2000
Condition: New
Width: 300mm
Pitch: 52.5mm
Customization:
Diamond Member Since 2014

Suppliers with verified business licenses

Rating: 4.0/5
Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
300*52.5*74N
Link
80
Overall Length
4200mm
Weight
115kg
Warranty
12 Months Under Normal Use
Material
Rubber and Steel
Delivery Time
5-15 Days
Transport Package
Wooden Pallet
Specification
300*52.5*80N
Trademark
No Marks or As Buyer′s Requests
Origin
Shanghai, China(Mainland)
HS Code
8431499900
Production Capacity
1000 Pieces Per Month

Product Description

Excavator AUSA HANIX HYUNDAI NEUSON Rubber track 300*52.5*74N:
 

Applicable machines
Excavators
Material  rubber and steel 
Specification 300*52.5*74N
Installation position  Installed on the excavators

Rubber Track 300*52.5*74n for Mini Excavator

The characteristics of rubber tracks 

1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft

ground than steel tracks 

2. A benefit to equipment operating in congested areas, rubber tracks make less noise than

steel tracks 

3. Rubber tracks permit machines to travel at a higher speed than steel tracks 

4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of

machine and decreasing operator's fatigue 

5. The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30

kg/m2, a major reason for its use on wet and soft terrain. 

6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled

vehicles of the same weight. 

7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles

equip with rubber track to do the same pulling work than that of wheeled vehicles. 


The notices of using rubber tracks 

1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm

when the machine is lifted. Readjust when the tension decreases. (Be careful because the

rubber crawler may come off if the tension is too low). 

2. Avoid projection from the frame around the rubber crawler, especially on its inner

circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame,

an accident such the rubber being cut can occur). 

3. Avoid sharp projections when traveling. 

4. Avoid turning too fast on concrete roads with a high coefficient of frction because this can

cause accidents such as cutting the rubber. 

5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately. 

6. When storing for long periods, keep indoors, away from direct sunshine and rain. 

7. Replace as soon as possible when abrasion of sprockets is observed 

We also have other kinds of and sizes of rubber tracks, if you have interest in it, do not hesitate

to send me a message and I will be very glad to be at your service. 

Looking forward to receiving your enquiry.


Adaptation Models:

Model Original Size PUYI Size
MH25 | AUSA 300X52,5X74 300X52,5X74N
X325 |  300X52,5X74 300X52,5X74N
X328 |  300X52,5X74 300X52,5X74N
X328E |  300X52,5X74 300X52,5X74N
ES300 | EUROCOMACH 300X52,5X74 300X52,5X74N
TS27S | EUROTOM 300X52,5X74 300X52,5X74N
H22A | HANIX 300X52,5X74 300X52,5X74N
N220.2 | HANIX 300X52,5X74 300X52,5X74N
N26B | HANIX 300X52,5X74 300X52,5X74N
ROBEX 28.5 | HYUNDAI 300X52,5X74 300X52,5X74N
ROBEX 28.7 | HYUNDAI 300X52,5X74 300X52,5X74N
2600 | NEUSON 300X52,5X74 300X52,5X74N
2702 | NEUSON 300X52,5X74 300X52,5X74N
2702RD | NEUSON 300X52,5X74 300X52,5X74N
2702RD SLR | NEUSON 300X52,5X74 300X52,5X74N
2800 | NEUSON 300X52,5X74 300X52,5X74N
2902 | NEUSON 300X52,5X74 300X52,5X74N
2902RD FORCE | NEUSON 300X52,5X74 300X52,5X74N
HR4A | SCHAEFF 300X52,5X74 300X52,5X74N
D20X22 | VERMEER 300X52,5X74 300X52,5X74N
Rubber Track 300*52.5*74n for Mini Excavator

Warehouse:
Rubber Track 300*52.5*74n for Mini Excavator

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2014

Suppliers with verified business licenses

Rating: 4.0/5
Manufacturer/Factory, Trading Company
Export Year
2008-06-19
Terms of Payment
LC, T/T, PayPal, Western Union, Small-amount payment