Rubber Track 300X52.5X84n Fit for Komatsu PC30mr PC35mr

• Customization: Available
• Type: Crawler Excavator
• Usage: Special Excavator, Marine Excavator, Mining Excavator, GM Excavator
• Model NO.: 300*52.5*84N
• Condition: New
• Width: 300mm
• Pitch: 52.5mm
• Link: 84
• Color: Black
• Warranty: 12 Months Under Normal Use
• Material: Rubber and Steel
• Delivery Time: 7-10 Days
• Exported Market: Global
• Transport Package: Wooden Pallet
• Specification: 300*52.5*84
• Trademark: No Marks or As Buyer′s Requests
• Origin: Shanghai, China
• HS Code: 8431499900
• Production Capacity: 1000 Pieces Per Month

Product Description

New Excavator Rubber Track 300*52.5*84N Use On Undercarriage:
 

Applicable machines	Excavators
Material	rubber and steel
Specification	300*52.5*84N
Installation position	Installed on the excavators

The characteristics of rubber tracks 

1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft

ground than steel tracks 

2. A benefit to equipment operating in congested areas, rubber tracks make less noise than

steel tracks 

3. Rubber tracks permit machines to travel at a higher speed than steel tracks 

4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of

machine and decreasing operator's fatigue 

5. The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30

kg/m2, a major reason for its use on wet and soft terrain. 

6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled

vehicles of the same weight. 

7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles

equip with rubber track to do the same pulling work than that of wheeled vehicles. 


The notices of using rubber tracks :

1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm

when the machine is lifted. Readjust when the tension decreases. (Be careful because the

rubber crawler may come off if the tension is too low). 

2. Avoid projection from the frame around the rubber crawler, especially on its inner

circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame,

an accident such the rubber being cut can occur). 

3. Avoid sharp projections when traveling. 

4. Avoid turning too fast on concrete roads with a high coefficient of frction because this can

cause accidents such as cutting the rubber. 

5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately. 

6. When storing for long periods, keep indoors, away from direct sunshine and rain. 

7. Replace as soon as possible when abrasion of sprockets is observed 

We also have other kinds of and sizes of rubber tracks, if you have interest in it, do not hesitate

to send me a message and I will be very glad to be at your service. 

Looking forward to receiving your enquiry.

Adaptation Models:

MODEL	ORIGINAL SIZE
MH35 (AUSA)	300X52,5X84
DX30 (DAEWOO)	300X52,5X84
SLO35 (DAEWOO)	300X52,5X84
SOLAR 035 (DAEWOO)	300X52,5X84
SOLAR 035PLUS (DAEWOO)	300X52,5X84
DX30 (DOOSAN)	300X52,5X84
DX30Z (DOOSAN)	300X52,5X84
ES400 (EUROCOMACH)	300X52,5X84N
ES400SR (EUROCOMACH)	300X52,5X84N
ES400ZT (EUROCOMACH)	300X52,5X84N
E4000 (EUROCOMACH)	300X55X82
230 (FAI)	300X109X41
235 (FAI)	300X109X41
MB358 (GEHLMAX)	300X52,5X84
H36C (HANIX)	300X52,5X84
H36CR (HANIX)	300X52,5X84
EX35.1 (HITACHI)	300X52,5X84
UE30 (HITACHI)	300X52,5X84
ROBEX 35.5 (HYUNDAI)	300X52,5X84
ROBEX 36.7 (HYUNDAI)	300X52,5X84
ROBEX 35.7 (HYUNDAI)	300X52,5X84
PC20 (KOMATSU)	300X109X41
PC20.2 (KOMATSU)	300X109X41
PC20.6 (KOMATSU)	300X109X41
PC25 (KOMATSU)	300X109X41
PC25 AVANCE R (KOMATSU)	300X109X41
PC25.1 (KOMATSU)	300X109X41
PC25R (KOMATSU)	300X109X41
PC25.2 (KOMATSU)	300X52,5X84
PC30 AVANCE R (KOMATSU)	300X52,5X84
PC30.6 (KOMATSU)	300X52,5X84
PC30.7 (KOMATSU)	300X52,5X84
PC30.7E (KOMATSU)	300X52,5X84
PC30MR (KOMATSU)	300X52,5X84
PC30MRX (KOMATSU)	300X52,5X84
PC30R (KOMATSU)	300X52,5X84
PC30R.8 (KOMATSU)	300X52,5X84
PC30UU.3 (KOMATSU)	300X52,5X84
PC35MR (KOMATSU)	300X52,5X84
PC35MR.1 (KOMATSU)	300X52,5X84
PC35MRX (KOMATSU)	300X52,5X84
PC35R.8 (KOMATSU)	300X52,5X84
PC38.2 (KOMATSU)	300X52,5X84
PC38.2 AVANCE R (KOMATSU)	300X52,5X84
PC38UU.2 (KOMATSU)	300X52,5X84
PC38UU.3 (KOMATSU)	300X52,5X84
PC38UUM.2 (KOMATSU)	300X52,5X84
YC35.8 (YUCHAI)	300X52,5X84
PC30MR1 (KOMATSU)	300X52,5X84

Parameters:

Size width*pitch	link	A	B	C	D	F	pattern	guiding
130*72	29-40	23	64.5	28	28	15	AF1	A2
150*60	32-40	22	64	22.5	24.5	15	AC	A2
150*72	29-40	23	64	23	23	15	AC	A2
170*60	30-40	19	57	22	22	13	CE	A1
180*60	30-40	23.5	64	21	21.5	15	AM	A1
180*72	31-43	25	68	29	29	15	BK	A2
180*72K	32-48	20	61	22	19.5	17	BB1	B2
B180*72	31-43	23	66	30	29	15	BB1	B2
H180*72	30-50	23	64	27	26	17	BK	A2
190*60	30-40	23.5	64	21	21.5	14	AM	A1
190*72	31-41	21	68	27.5	26.5	15	BF	A2
200*72	34-47	23	76	28.5	26.5	18	BB1	A2
200*72K	37-47	21	69	29.5	29	18	BM	A2
Y200*72	40-52	24	64	28.5	29.5	12	BK	A2
230*48	60-84	24	72	24	25	21	BI	B1
230*48K	60-84	24	66	21	20	19	BI	B2
230*72	42-56	24	82	30	26	18	AF1	A2
230*72K	42-56	20	69	29.5	28	16	BD	A2
230*96	30-48	25	68	23.5	25.5	22	BE	B1
230*101	30-36	25	74	22.5	29	19	BO	B1
250*47K	84	23	70	24	20	22	BD	B2
250*48.5K	80-88	24	66	21	20	19	CA	B2
250*52.5K	72-78	26	81	23	25	25	BA	B2
250*52.5	72-78	29	72	23	25	21	BI	B1
250*72	47-57	24	82	30	26	18	AF1	A2
B250*72	34-60	23	64	29	22	10	CI	A2
B250*72B	34-60	23	78	29	26	16	AB	B2
250*96	35-38	25	70	20	19	22	BB1	B2
250*109	35-38	40	89	24.5	14	20	CG	B1
260*55.5K	74-80	31	80	21.5	27	24	CA	B2
Y260*96	38-41	25	68	23	25.5	22	AB	B1
260*109	35-39	30	84	24	29	15	AB	B1
E280*52.5K	70-88	29	84	27	26	22	BI	B2
280*72	45-64	25	78	29.5	26	22	AL	A2
Y280*106K	35-42	30	80	27.5	28	20	AB	B2
300*52.5N	72-98	30	82	25	18	20	BI	B1
300*52.5W	72-92	43	96	22	23	22	BE	B1
300*52.5K	70-84	29	84	27	26	22	BI	B2
300*52.5KW	72-92	40	92	25	24	22	BI	C1
E300*52.5K	70-88	29	84	27	26	22	BI	B2
KB300*52.5	72-92	40	90	24.5	24.5	22	BI	C1
KB300*52.5N	72-98	30	82	23	20	25	BI	B1
JD300*52.5N	72-98	30	80	23.5	22	22	BI	B1
300*53K	80-96	31	88	25	19.5	21	BI	B2
300*55	70-88	29	86	25.5	27.5	23	BI	B1
300*55.5K	76-82	31	82	22	27	21.5	CA	B2
300*71K	72-76	42	106	23	24	40	BD	B2
300*72	36-40	23	75	40	34	18	BK	A2
BA300*72	36-46	26	76	29	27	19	AF1	A2
300*109N	35-42	29	82	27	28	25	BE	B1
300*109W	35-44	38	90	26	29	24	BB1	B1
K300*109	37-41	27	85	23.5	27.5	20	AB	B2
300*109WK	35-42	40	90	24.5	14	23	CG	B1
320*52.5	72-98	30	83	23.5	18	21	BI	B1
320*54	70-84	29	80	23	21	20	AB	B1
B320*55K	70-88	30	82	25	30	23	BE	B2
Y320*106K	39-43	31	80	26	27	24	AB	B2
350*52.5	70-92	40	94	22.5	19	30.5	BE	B1
E350*52.5K	70-88	29	84	27	26	22	BI	B2
350*54.5K	80-86	40	92	23.5	22.5	23	AD	B2
B350*55K	70-88	30	82	25	30	23	BE	B2
350*56	80-86	39	89	25.5	16.5	20.5	BC	B1
350*75.5K	74	37	98	24.5	25	25	CA	C2
350*108	40-46	40	90	24.5	14	25	CG	B1
350*109	41-44	40	92	26	20	25	BO	B1
Y370*107K	39-41	38	94	25.5	28	23.5	AB	B2
400*72.5N	70-80	38	100	26	24	25	AF3	B1
400*72.5W	68-92	51	108	26	24	25	BI	B1
Y400*72.5K	72-74	28	86	30	24.5	25	AF3	C2
KB400*72.5K	68-76	37	94	24	26	23.5	BA	B2
400*72.5KW	68-92	46	112	24	23.5	25	BI	B2
400*74	68-76	38	100	25.5	29.5	24	BH2	B1
400*75.5K	74	39	100	25	26	25	CA	C2
Y400*107K	46	38	89	27	25	25	AB	C2
K400*142	36-37	27	87	34	27	29	CF	C2
400*144	36-41	47	98	27	11	30	CF	B1
Y400*144K	36-41	35	126	29.5	26	25	BE	B2
450*71	76-88	42.5	115	29.5	17	30	BE	B1
DW450*71	76-88	44	114	31	27	25	BD	B1
450*73.5	76-84	42	118	31	34	28	CG	B1
450*76	80-84	48	122	30.5	31.5	26	BI	B1
450*81N	72-80	42	117	26	24	27	BE	B1
450*81W	72-78	58	140	29	32	30	BI	B1
KB450*81.5	72-80	42	110	31.5	27.5	26	BD	B1
K450*83.5	72-74	42	112	24.5	25	28	BI	B1
Y450*83.5K	72-74	38	113	24	27	26	CA	B2
K450*163	38	38	114	27	28	30	AB	B2
485*92W	74	62	142	34	33	30	BE	B2
K500*71	72-76	41	106	23	24	42	BE	B2
500*92	72-84	48	130	27	26	29	BI	B1
500*92W	78-84	64	155	32.5	35.5	33	BI	B1
K500*146	35	40	106	26.5	24.5	50	BB1	A2

Warehouse:




Quality Control:

1.Ex works Inspection

2.Products Audits/Examination(Strict inspection according to customer's request)

3.Production Procedure Audit/Examination(Entire Procedure Control)

4.Raw material Inspection/Examination;Purchased Parts Inspection(Including All Purchased Material)

Rubber track warranty

All Pooyert rubber tracks and rubber pads are one year normal use warranty,If there is any quality problem,during the warranty period,we are responsible for the replacement of the new rubber track,just need to provide photos of the tracks as they sit on the machine and serial number on the tracks.

Company introduction:

Serving since 2000,POOYERT has been supplying the construction industry with premium grade replacement rubber track and rubber pads that can be widely applied in construction machinery,agricultural machinery and other specialized vehicles.

Made of all natural rubber and high quantity synthetic rubber compounds including carbon black,and continuous steel cords that are protected with thick vulcanized rubber,POOYERT leads the way in today's modem track manufacturing.POOYERT tracks are produces under strict quality guidelines and have ISO9001 Accredited Certification.