Middle rubber track Load-bearing 4T undercarriage DP-LFG-400
Item: Rubber track undercarriage
Main Parts:Rubber track;construction frame;tensioning screw,drive wheel/sprocket; support wheels,and idler,etc.
Material:Steel,rubber,UHMW-PE(wheels)
Description of the rubber track undercarriage:
1. Wide used on snow blower,paver,dumper,mini excavator,small harvester,anti-fire robot,raw mower,and other small or mid size machine design.
2. Easy for vehicles to run on hill land, mud road, sand ground...
3.Max load only 50kgs,if your idea of design is over 50kgs,please contact us for choosing other models.
4.Application: All terrain/season;
5.Warranty: 12 months
Their choice of operating environment and notice are as follows:
(1) rubber track,temperature is generally between -25 ~ + 55'C.
(2) chemical, oil, sea salt will accelerate the aging track, after use in such an environment, need to clean track.
(3) sharp edge (such as steel, stone, etc.) of the road will cause damage to the rubber track.
(4) the curb of the road, rutted or uneven pavement can cause side edge of the ground track pattern to be cracked, but the rubber track can be used continuously if the inside steel cord has no injuries.
(5)gravel, gravel road will result in abrasion earlier where the idlers connect with the rubber track, and formation of small cracks. Serious water ingress, causing iron core loss, wire breakage.
(6)30 degree slope and 15 degree side slope,for climbing
You can send us message with your size for the undercarriage as we can customized for you
1.Max loaded weight and what kind of machine to fit is necessary to determine the rubber track type
2.The entire size of the rubber track undercarriage,like the Width,Length,Height is also very important for us to make a recommendation for you.
3.The undercarriage in the ads,please have a reference,if you like,we can adjust the size for you.Special customized size is also acceptable.
More pictures for reference,rubber track undercarriage with power part
Spec in the ads
| length |
width |
height |
diameter of the wheels |
net weight |
loading bear |
model of rubber track |
|
|
|
| 1650mm |
1164mm |
402mm |
212mm |
489Kg |
700Kg |
YN-180 |
|
|
|
Electric motor we can supply for this rubber track undercarriage:
for one whole set including 2*motor with reducer+1*controller+1*remote control
(not including battery)
Factory photo:
Audited Supplier 
){kind=link}